Stock Code：301157
What are you looking for?
HFP series is a new all-in-one hybrid solar charge inverter, which integrates solar energy storage & means charging energy storage and AC sine wave output.
Full digital voltage and current double closed loop control, advanced SPWM technology, output of pure sine wave.
Two output modes: mains bypass and inverter output; uninterrupted power supply.
Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging.
Advanced MPPT technology with an efficiency of 99.9%.
Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.
ON/OFF rocker switch for AC output control.
Power saving mode available to reduce no-load loss.
Intelligent variable speed fan efficiently dissipate heat and extend system life.
Lithium battery activation by PV solar or mains, allowing access of lead-acid battery and lithium battery.
360° all-around protection with a number of protection functions.
Complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.
| Models | HFP4850S80-H |
| Parallel mode | |
| Permitted parallel number | 1~6 |
| AC mode | |
| Rated input voltage | 220/230Vac |
| Input voltage range | (170Vac~280Vac) ±2% (90Vac-280Vac) ±2% |
| Frequency | 50Hz/ 60Hz (Auto detection) |
| Frequency Range | 7±0.3Hz ~ 55±0.3Hz (50Hz); 57±0.3Hz ~ 65±0.3Hz (60Hz); |
| Overload/short circuit protection | Circuit breaker |
| Efficiency | >95% |
| Conversion time (bypass and inverter) | 10ms (typical) |
| AC reverse protection | Available |
| Maximum bypass overload current | 40A |
| Inverter mode | |
| Output voltage waveform | Pure sine wave |
| Rated output power (VA) | 5000 |
| Rated output power (W) | 5000 |
| Power factor | 1 |
| Rated output voltage (Vac) | 230Vac |
| Output voltage error | ±5% |
| Output frequency range (Hz) | 50Hz ± 0.3Hz； 0Hz ± 0.3Hz |
| Maximum Efficiency | >92% |
| Overload protection | (102% < load <125%) ±10%: report error and turn off the output after 5 minutes; (125% < load < 150%) ± 10%: report error and turn off the output after 10 seconds; Load >150% ±10%: report error and turn off the output after 5 seconds |
| Peak power | 10000VA |
| Loaded motor capability | 4HP |
| Rated battery input voltage | 48V (Minimum starting voltage 44V) |
| Battery voltage range | Undervoltage alarm/shutdown voltage/overvoltage alarm /overvoltage recovery... settable on LCD screen) |
| Power saving mode self-consumption | Load≤50W |
| AC charging | |
| Battery type | Lead acid or lithium battery |
| Maximum charge current(can be set) | 0-60A |
| Charge current error | ± 3Adc |
| Charge voltage range | 40 –58Vdc |
| Short circuit protection | Circuit breaker and blown fuse |
| Circuit breaker specifications | 40A |
| Overcharge protection | Alarm and turn off charging after 1 minute |
| PV charging | |
| Maximum PV open circuit voltage | 500Vdc |
| PV operating voltage range | PV operating voltage range |
| MPPT voltage range | 120-450Vdc |
| Battery voltage range | 40-60Vdc |
| Maximum PV input power | 5500W |
| Maximum PV input current | 22A |
| PV charging current range (can be set) | 0-80A |
| Charging short circuit protection | Blown fuse |
| Wiring protection | Reverse polarity protection |
| Hybrid charging Max charger current specifications (AC charger+PV charger) | |
| Max charger current(can be set) | 0-80A |
